Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
RINGDOWN PHONE
- Thread starter PERRYPJ
- Start date
smokinjoe2938
Programmer
you mean 6.2 right also how do you currently have it built?
acss sme acis sme acss cm 5.2.1 acss cm and cmm acss aura messaging.
acss sme acis sme acss cm 5.2.1 acss cm and cmm acss aura messaging.
- Thread starter
- #3
smokinjoe2938
Programmer
so are you asking for when handset is picked up it rings anbother phone?
acss sme acis sme acss cm 5.2.1 acss cm and cmm acss aura messaging.
acss sme acis sme acss cm 5.2.1 acss cm and cmm acss aura messaging.
I have done it this way.
1. Create the station to be use for the ring down.
2. Create the station that will ring when you pick up the ring down phone.
3. Create a ABBREVRIATED PERSON dial list for the station number in step one.
4. Assign the number of the station created in step two as the first entry in the ABBR-DIAL PERS list you are creating.
5. Go and modify the station in step 1. Add the person list one from step three (on page four) and set the hot line destination to use the list and the dial code entry.
display station 1070000 Page 4 of 4
STATION
SITE DATA
Room: Headset? n
Jack: Speaker? n
Cable: Mounting: d
Floor: Cord Length: 0
Building: Set Color:
ABBREVIATED DIALING
List1: personal 1 List2: List3: system
HOT LINE DESTINATION
Abbreviated Dialing List Number (From above 1, 2 or 3): 1
Dial Code: 1
Line Appearance: call-appr
When you pick up the first phone, the second one should then ring. Have also made the ring down to call a hunt group or a vdn as well.
1. Create the station to be use for the ring down.
2. Create the station that will ring when you pick up the ring down phone.
3. Create a ABBREVRIATED PERSON dial list for the station number in step one.
4. Assign the number of the station created in step two as the first entry in the ABBR-DIAL PERS list you are creating.
5. Go and modify the station in step 1. Add the person list one from step three (on page four) and set the hot line destination to use the list and the dial code entry.
display station 1070000 Page 4 of 4
STATION
SITE DATA
Room: Headset? n
Jack: Speaker? n
Cable: Mounting: d
Floor: Cord Length: 0
Building: Set Color:
ABBREVIATED DIALING
List1: personal 1 List2: List3: system
HOT LINE DESTINATION
Abbreviated Dialing List Number (From above 1, 2 or 3): 1
Dial Code: 1
Line Appearance: call-appr
When you pick up the first phone, the second one should then ring. Have also made the ring down to call a hunt group or a vdn as well.
smokinjoe2938
Programmer
did you enable the feature in cha system parameters special,( page 6 on our 6.2) and check HOTLINE FOR ip telephone?
acss sme acis sme acss cm 5.2.1 acss cm and cmm acss aura messaging.
acss sme acis sme acss cm 5.2.1 acss cm and cmm acss aura messaging.
smokinjoe2938
Programmer
so are you all set now
acss sme acis sme acss cm 5.2.1 acss cm and cmm acss aura messaging.
acss sme acis sme acss cm 5.2.1 acss cm and cmm acss aura messaging.
- Status
Similar threads
