I have a system exclusively operating on T's for trunks. All are LS trunks in the T. Most stations are used for outbound calling, but a couple new ones are being used for inbound. When the inbound is hung up, the phone will ringback and when picked will be dead. This could happen 1-4 times on same call. Any ideas?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Ringback on SLT?
- Thread starter ScoTTeL
- Start date
Most of the times thats a problem with the single line phone (disconnect timer).there is nothing you can do in the programming to control that ,try different type of phone.I had the same problem with the cheap SL,when I replaced it ,the problem was solved.
Good Luck.
Good Luck.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question