Ring tone on qsig

[sbancona]

Hello,

I have configured a QSIG link between an MD110 and an IP PBX.

All is working but the rign tone in a call from MD110 to IP PBX.

When I make a call from MD110 to IP PBX i cannot ear notthing until the answer of the IP Extension Number.

Last week I got the same problem from IP PBX to MD110 but I solved the problem changing VARC parameter from 00000214 to 00000314.

Here is the ROCAI RODAI RODDI configuration:


<RODAP:ROU=130;ROUTE DATA
ROU TYPE VARC VARI VARO FILTER
130 SL60 H'00000314 H'15400000 H'06300000 NO

END

<RODAP:ROU=130;ROUTE DATA
ROU TYPE VARC VARI VARO FILTER
130 SL60 H'00000314 H'15400000 H'06300000 NO

END

<RODDPEST=754;EXTERNAL DESTINATION ROUTE DATA
DEST DRN ROU CHO CUST ADC TRC SRT NUMACK PRE
754 130 0005000000000250000000000 0 1 0

END


Thank you.

bye