Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Return to Auto-Attendant Question 1
- Thread starter jlk53
- Start date
-
1
- #2
curlycord
Programmer
- Thread starter
- #3
curlycord
Programmer
Its not to clear what you want on exact setup.
Tell AA not to answer under AA and lines if you dont want AA
F982 setting is why your getting operator not available....usually it goes to general mailbox after that.
Their is a setting in Table and Attdnet DN, set that to what you want, only older system (maybe new too) setting it to 000 disabled 0.
Also under Sets-7500-Capabilties is the forward no answer setting.
=----(((((((((()----=
curlycord
Tell AA not to answer under AA and lines if you dont want AA
F982 setting is why your getting operator not available....usually it goes to general mailbox after that.
Their is a setting in Table and Attdnet DN, set that to what you want, only older system (maybe new too) setting it to 000 disabled 0.
Also under Sets-7500-Capabilties is the forward no answer setting.
=----(((((((((()----=
curlycord
- Thread starter
- #5
- Status
Similar threads
- Locked
- Question
- Locked
- Question