Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Retain or Replace 2

Status
Not open for further replies.

OldSchool70

Technical User
Feb 25, 2015
218
US
Upgrade an IPO SE recently. Since then, when accessing config via IPO Manager, we get a message asking if we want to Retain the current configuration or Replace it with a very old one. Any idea why we are getting this and how to get rid of it. Tried Retaining making a change and then merging. The next time we open IPO Manager we get the same thing.
 
You will get it when the IPO config doesn't match last stored in Manager, usually happens when changes are made with Web Manager.

"Trying is the first step to failure..." - Homer
 
You need to make changes on a global level, rather than on a single system level. Open SE configurations using Manager connecting to the primary, rather than to the individual site itself.
 
Check your settings in Manager. In Manager, go to File / Preferences. Near the bottom you will see Consolidate Solution to Primary Settings with a check box. In your situation, I'm betting it's checked. Remove the check and the message will be no more. Click help and check out the associated help file and the reasoning will become pretty clear. Hope that helps.
 
That didn't work for me. The box was not checked.
 
Do you have any applications that need to make changes to the configuration of phones system. Like a property management system or Duvoice system?

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top