Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Restrictions And CDP

Status
Not open for further replies.

dclake

IS-IT--Management
Feb 3, 2009
247
LC
Hey guys I'm currently doing a project integrating a number of BCM's, IP Offices and CS1000. I have been able to get most of these working but have an issues with some of the remote numbers. These numbers are currently restricted but the extension follow the same pattern. EG.

We want to allow 7XXX - Extension
But we want to restrict calling to 7XXXXXXX

How can this be done - We have a whole range of numbers (99) which are affected by this.
 
For the CS1000's it's easy, but you would need to go into the routing section for the BCM's and see how it's currently setup.

All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

If it's working, then leave it alone!.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top