restricting calls in nortell option 11c

[ChrisKnerr2010]

is it possible to have a certain dn to only recieve calls from certain external dn's?

example: i have dn 1234 programmed in my option 11 as a trunk access code. however i want to be able to access 1234 from only 2222 2223 2224 4444 from external ip phones.

any help would be appreciated

 

[SL1M1]

Slightly confused regarding whether this is inbound or outbound so herewith both possible options you may be wanting:-

TGAR to TARG restrictions - Apply to DN's matching the routes TARG will be restricted from accessing that route but that's outbound - Programmed in LD 10/11/20 for sets and
LD 16 for your RouteDataBlock Change

IncomingDigitConversion - Table IDC is built within the RouteDataBlock of your DDI side of the Trunk ie incoming digits from your DDI can be converted to a particular DN programmed in LD 49 to buld that table and assinged in LD 16 for that Route prompt IDC YES / DCNO X (Table)

Hope I'm on the right track to help you ?

Cheers!!

 

[bhassell2000]

I think to dial the ACOD the phone has to have MTC in the class of service

Thanks,

Buddy

 

[ChrisKnerr2010]

TO SL1M1,

Essentialy its going to be treated as an inbound call. The ip setup is Cisco and we are accessing the trunk on the opt. 11. I have it set now where the cisco can hit the trunk but so can every one else that dials that particular dn. I want to limit it to where only the dn's i specify can dial that number