Restricing my overhead paging

[wiremantx]

I have a Route 22 for overhead paging.

I set TARG to 01 and 02 however when i go to ld 16 to put tARG to 00 it wont let me. I have a bunch of phones with TGAR 0 that i need to restrict from Route 22 so they dont overhead page. How can i do this without having to change every phone TGAR to 0?

 

[janaya]

Can you post how you are doing this. Try just TARG 0 and not 00.

You look to ge doing this correctly.

 

[wiremantx]

I put in 0 and 00 but this is what I show


TYPE RDB
CUST 00
ROUT 22
DES
TKTP PAG
NPID_TBL_NUM 0
NACC PGNR
ESN NO
ICOG OGT
SRCH LIN
STEP
ACOD 88
TARG 01 02
CLEN 1
OABS
TIMR ICF 512
OGF 512
EOD 13952
DSI 34944
NRD 10112
DDL 70
ODT 4096
RGV 640
GRD 896
SFB 3
TFD 0
SST 5 0
NEDC ETH
FEDC ORG
HOLD 02 02 40
SEIZ 02 02
RGFL 02 02
CDR NO
MUS NO
TTBL 0
OHTD NO
ALRM NO
ART 0
SGRP 0
AACR NO

 

[GHTROUT]

TARG 0 does not exist. TGAR 0 means no TGAR.

For the last 15+ years, by default, all new phones built are TGAR 1.

You are stuck adding the TGAR to the phones, or making the page access code a steering code and relying on BARS/NCOS


--
GHTROUT.com - Help for Nortel Meridian/CS1000 System Administrators
--