Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
resizing objects from the center
- Thread starter tracuser
- Start date
BionicJohn
Technical User
Hi, tracuser,
It is possible, but may take a few attempts to get the exact size you want. (I'm assuming you're using PM Win)
Open the Control Palette (Ctrl+')
Click the centre point of the reference-point proxy.
Enter the scaling factor alongside the width.
Click the "proportional" button next to it, and the height will be calculated.
Click the Apply button on the left.
To reset the image to its oringinal size, enter 100% as the scaling factor.
I've posted a screenshot at: which should help.
Iechyd da! John
22:31 09/04/03 BST
It is possible, but may take a few attempts to get the exact size you want. (I'm assuming you're using PM Win)
Open the Control Palette (Ctrl+')
Click the centre point of the reference-point proxy.
Enter the scaling factor alongside the width.
Click the "proportional" button next to it, and the height will be calculated.
Click the Apply button on the left.
To reset the image to its oringinal size, enter 100% as the scaling factor.
I've posted a screenshot at: which should help.
Iechyd da! John
22:31 09/04/03 BST
- Thread starter
- #3
BionicJohn
Technical User
Hi, tracuser,
All part of the service...
Iechyd da! John
00:13 12/04/03 BST
All part of the service...
Iechyd da! John
00:13 12/04/03 BST
- Status
Similar threads