We have a customer install coming down the line that will require resiliency between two controllers. We are sending someone to EMGR / OpsMan training, but I had a question after walking through the admin guides on VDN and resiliency.
The primary requirement for the DN's of the sets will be that they are unique. In a clustered environment, the system will check first if the dialed DN is internal, then look at the RDN to see if it is a remote directory number. If that matches, it will use the CEID and the ARS form to figure out how to get to the other device. Am I following that right? Thanks.
The primary requirement for the DN's of the sets will be that they are unique. In a clustered environment, the system will check first if the dialed DN is internal, then look at the RDN to see if it is a remote directory number. If that matches, it will use the CEID and the ARS form to figure out how to get to the other device. Am I following that right? Thanks.