Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Resetting the ITG
- Thread starter savvy101
- Start date
ld 32 disc ( TN ) then you could reseat the card
enlc (TN )
or
Telnet through OTM to the card
or
also of the faceplate there is a round connection(not sure what its called) to DB9 to your laptop you could log into the card
admin1
(switchpassword)
or depends what rls your on
itgadmin
itgadmin
then type cardReset
if this is ITG trunk you will need to disable the DCH in LD 96 first
It's only dialtone-VZ
enlc (TN )
or
Telnet through OTM to the card
or
also of the faceplate there is a round connection(not sure what its called) to DB9 to your laptop you could log into the card
admin1
(switchpassword)
or depends what rls your on
itgadmin
itgadmin
then type cardReset
if this is ITG trunk you will need to disable the DCH in LD 96 first
It's only dialtone-VZ
- Status
Similar threads
- Question
- Locked
- Question