Resetting "Ethernet Errors" on BPS2K?

[saintsteve]

After I reset all port statistics and try to view ethernet errors on the BPS2K, the errors do not reset. If I telnet into the switch I see that the statistics have been reset but in the web interface or in device manager the statistics are not being reset. Any ideas?

 

[ZachBenj]

From a telnet Under the 'Switch Configuration Menu' there is a 'Clear All Port Statistics'. Try that and see what happeans.

My suggestions are what I would try myself. If incorrect, I welcome corrections to my knowledge.
Scott
stomlin@baptistfirst.org