Dec 9, 2010 #1 infonaut Technical User Mar 18, 2009 192 BS Hi all, Please help,steps needed on returning password to default on 0x32.
Dec 9, 2010 #2 ironhorse17 Technical User May 7, 2010 809 CA FAQ's on this board how to debug system. Upvote 0 Downvote
Dec 9, 2010 #3 Firebird Scrambler Systems Engineer Apr 7, 2003 7,250 GB Try this area http://www.tek-tips.com/faqs.cfm?fid=6692 All the best Firebird Scrambler Meridian 1 / Succession and BCM / Norstar Programmer in the UK http://www.linkedin.com/in/davidbromley If it's working, then leave it alone!. Upvote 0 Downvote
Try this area http://www.tek-tips.com/faqs.cfm?fid=6692 All the best Firebird Scrambler Meridian 1 / Succession and BCM / Norstar Programmer in the UK http://www.linkedin.com/in/davidbromley If it's working, then leave it alone!.
Dec 9, 2010 #4 tetote IS-IT--Management Apr 23, 2010 107 MX To do this the first thing you need is a FastRad. Upvote 0 Downvote
Dec 9, 2010 Thread starter #5 infonaut Technical User Mar 18, 2009 192 BS Thankyou both Ironhorse17 & Firebird scrambler. Upvote 0 Downvote