kringkring
IS-IT--Management
m trying to reset my 56K USrobotic modem but forgot the initial dip setting requirements. Does anyone remember the dip switch settings required to reset a 56K US Robotics modem?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
reset usb robotic modem 1
- Thread starter kringkring
- Start date
- Status
-
1
- #2
devinwheeler
Technical User
Hello,
For 9600n81:
(1)Set dip switches 1/3/5/8 down, turn on.
(2)At command line enter: AT&F0&F1&F2&U6&N6&WO
(3)Turn off, set dip switch 4 down, turn back on.
*Make sure the software you are using, IE procomm, is set up at 9600n81 as well.
For 9600n81:
(1)Set dip switches 1/3/5/8 down, turn on.
(2)At command line enter: AT&F0&F1&F2&U6&N6&WO
(3)Turn off, set dip switch 4 down, turn back on.
*Make sure the software you are using, IE procomm, is set up at 9600n81 as well.
- Status
Similar threads
- Locked
- Question
- Locked
- Question