I currently have a callpilot server that will not boot. It goes through sequence 1 thru 8 then hangs up with the hex display showing "HOST". Looking through the manual, it seems the card hung during the bios, since step nine is NT boot. But the book doesn't say how I can reset the bios. I assume it is similar to a bios reset on a pc, you short the pins on the motherboard. Is there a similar process here? Any help is more than welcome. Thanks
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Reset the BIOS on a Callpilot Server 201i???
- Thread starter cularow1
- Start date
strmwalker
Technical User
curlarow1...i would do what xtract said re-image the hard
drive.what release are you on the callpilot?
no problems only solutions
strmwalker
drive.what release are you on the callpilot?
no problems only solutions
strmwalker
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question