Reset BCM 50 IP 1

[RossV]

I have a BCM50 that one of my counterparts changed the IP on and then forgot what it was. How do I reset the IP to default without knowing what it is? There isn't a serial port on the box to do a direct connect.
Thanks,
Ross

 

[xtract]

You can connect an ethernet cable on the OAM port of the BCM50 and connect using the default OAM IP address (10.10.11.1 if im not mistaken!)

 

[biv343]

Plug into the OAM port (far left port of the 4 LAN/expansion ports). You'll get a DHCP address of 10.10.11.2. Connect via element manager to 10.10.11.1.

 

[steeef]

if you dont get an IP via DHCP on the OAM port, install some ethernet-sniffer tool (like wireshark) and monitor that port while booting the bcm.

 

[senk1s]

You can change the IP address using the set login