Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
RES and Bluetooth Printers
- Thread starter mr54443
- Start date
Hi,
i tested the epson tmp20 BT and the bixolon sppr200ii bt successfully via opos.
NOTE: If you use the Bixolon OPOS it should be the only installd opos. there are problems if you install epson opos and bisxolon opos on one device.
I would prefer the epson tmp20 bt because they are fastern as the bixolon. You have to wait about 20sec for the first print with bixolons, the others are nerly the same.
i tested the epson tmp20 BT and the bixolon sppr200ii bt successfully via opos.
NOTE: If you use the Bixolon OPOS it should be the only installd opos. there are problems if you install epson opos and bisxolon opos on one device.
I would prefer the epson tmp20 bt because they are fastern as the bixolon. You have to wait about 20sec for the first print with bixolons, the others are nerly the same.
- Thread starter
- #3
Hi,
i've also one TM-P60II in the office.
Steps:
1.) Install EPSON OPOS (I use ADK280ER8)
2.) Connect the Printer
3.) Check the Outgoing Bluetoothport in Bluetoothsettings
4.) Configure the Device in Epson OPOS as Bluetooth and the correct Port
5.) Configute the Printer in POS-Configurator as OPOS Device
i've also one TM-P60II in the office.
Steps:
1.) Install EPSON OPOS (I use ADK280ER8)
2.) Connect the Printer
3.) Check the Outgoing Bluetoothport in Bluetoothsettings
4.) Configure the Device in Epson OPOS as Bluetooth and the correct Port
5.) Configute the Printer in POS-Configurator as OPOS Device
- Status