Request for Site to Site VPN instructions

[zyn]

Does anyone have a set of diagrams, or atleast a 'standard' ip addressing scheme/setup for connecting 2 Windows Servers via VPN, both of which have 2 nics in each, and connect via ADSL routers. I've looked, but no joy. What subnet to use, what ip to use...etc

I'd appreciate it, thks
zyn

 

[ChicagoTechNet]

this may help. quoted from

http://www.chicagotech.net.

How to Setup A Site-to-Site VPN Connection

To setup a Site-to-Site VPN Connection , you may need to configure two windows servers for the Answering and Calling Routers. Here are the steps:

1. Run RRAS, on Configuration page, select LAN routing.
2. Configure VPN on the Answering Router.
3. Configure the Demand-dial Interface on the Answering Router.
4. Configure VPN on the Calling Router.
5. Configure the Demand-dial Interface on the Calling Router.
6. Confirm the Remote Access Policy Configuration on the Answering and Calling Routers


Robert Lin, MS-MVP, MCSE & CNE
Windows, Network, Internet, VPN, Routing and How to at

http://www.ms-mvps.com