Reporting on MBG / TW devices

[mnpuckett]

Anyone know of a good way to report on MiNet & SIP devices that are setup on an MBG for Teleworker?

On a separate note, does anyone know if a UCA client will prompt for an ICP Password, when setting the softphone to TW? If it is set on MBG, like it does for a phone. I haven't been able to test, or find any specifics relating to UCA softphone and the ICP password.

TY in advance!

 

[LoopyLou]

When you change a UCA softphone to TW mode you have to enable it, put in the teleworker IP address and then send a request for a "certificate" that needs to be accepted in the MBG. No password the certificate is the authentication and the UCA softphone will already have had to be setup as an extension on the 3300 in you are using it on the LAN.

The MBG will show you a list of devices setup as TW.

I'd tell you a UDP joke but I'm afraid you won't get it. TCP jokes are the best because you always get them.

 

[mnpuckett]

UCA6 does not use certificates anymore. Had to upgrade this client for the IDS authentication piece of MAS5. So far it is working great BTW.

We run things multi-tenanted and for BI purposes I'd like to pull these reports in an automated fashion.

IE: I found that in the vMCD (3300) I can export the User & Device spreadsheet on a schedule.