We have converted about 200 Access 97 dbs to Access 2003. In one of them, a report that had the width set to fit on one letter landscape page in 97 now has trippled in size in 2003. The 97 version of the file still has the correct report width. Does anyone know how to get my 2003 file to show the correct report size?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Westi on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Report width tripples in Access 2003
- Thread starter neeko1226
- Start date
Do you mean when you print the report of preview it you have two blank pages for every report page with visible contents?
If so I believe there is probably one (or more) controls on the report that are very slightly over hanging the edge of the page. Sometimes the overhang can be so slight it isn't visible when printed or previewed.
Try moving everything a couple of clicks to the left and see if this makes a difference.
HTH,
Ed Metcalfe.
Please do not feed the trolls.....
If so I believe there is probably one (or more) controls on the report that are very slightly over hanging the edge of the page. Sometimes the overhang can be so slight it isn't visible when printed or previewed.
Try moving everything a couple of clicks to the left and see if this makes a difference.
HTH,
Ed Metcalfe.
Please do not feed the trolls.....
- Status
Similar threads
- Locked
- Question
- Locked
- Question