Report formatting and printing

[LDR]

I have two questions on the same report that I am working on,

1) GH1 is my customer name, I would like GH1 to start on a new page with each change in GH1 and I can not seem to find the option at all.
2) I have adobe also and is it possible to get this report to print to a PDF based on GH1.

So my over all desired result would be to run this report and then have it look at each GH1 and printer that to a PDF file <customer_name.pdf> and do this for each GH1 till the report is complete and not to have any other GH1’s information mixed in.

My Version is CR10

Thanks!

 

[ShortyA]

Hi,
if you righthand mouse click over the GH1 and select Section Expert there will be an option for "New Page After" to answer question (1).

As far as question (2) I used Crystal Enterprise to do something similar but haven't done it with pure Crystal Reports. Perhaps another of the experts here could help with this...

ShortyA

 

[LDR]

I see what you are talking about, I will have to play around with that as when I check that box I get one blank page at the start of each new GH1 with just the GH1 on it.

THanks agian!