replacing RG5DC

[nukmis]

Hi guys,

Im planning to replace RG5DC in a duplicated system having 5 lims,can you pls help me on how to do it. can you pls give a step by step procedure in replacing it. i will try to replace RG5DC in a running system.

thank you in advance.

 

[fcpli]

From Alex:

3.2 Replacement of an RG5DC with an RG5DC
For the RG5DC to be replaced:
- Unplug its signalling cables and power cable.

- Remove.


Strap the new RG5DC and set the front keys as on the removed RG5DC.

For the new RG5DC:
- Plug-in.

- Set the front switch to OFF.

- Plug-in the power cable.

- Set the front switch to ON.

- Plug-in the signalling cables.


If output -60V was used, plug-in the cable.

After replacement, check that the magazine is working.

 

[nukmis]

fcpli,

are there commands needed before replacing the RG5DC(system is running in BC11)??
and it is also a duplicated system..

Thanks..

 

[fcpli]

Well, youcan always dump the PBX before, but otherwise just do as explained....