Replacing older software with XC

[NARSBARS]

I pulled a 7.1 XC software and want to know what happens if I replace an older version in an MICS.
I won't replace anything older than 4.0.

NARSBARS

 

[Brutalis]

It sounds like you are talking about downgrading the software. If so, the system will do a "cold restart" and you will loose all programming and key codes.

 

[curlycord]

It may not even startup and yes you will loose key code for PRI.

If does not matter:

Do Startup
While applying template count to 20 and pull the power.
Remove any cards not required.
Swap software and power up.




=----(((((((((()----=
curlycord

http://www.curlycord.com

 

[NARSBARS]

Sorry! I was not clear. I have an extra 7.1 XC and want to toss some older software from one of the MICS I have.
Any problems?

NARSBARS

 

[curlycord]

Still not clear if the case.
Toss?


Do you want to replace new software with older software?
Do you want to upgrade software?
Do you want to downgrade software?





=----(((((((((()----=
curlycord

http://www.curlycord.com

 

[NARSBARS]

I want to replace older software 4.0 or up with 7.1XC. I don't need the XC features but want to know what effect it might have.

NARSBARS

 

[curlycord]

Nothing effected if all upgrade procedures done correctly according to "Upgrade" in the 7.1 Installer Guide.

=----(((((((((()----=
curlycord

http://www.curlycord.com

 

[NARSBARS]

Thanks guys,
Now I am off to my remedial posting class before asking another clear as mud question.

NARSBARS

 

[curlycord]

Monday's are an exception
lol


=----(((((((((()----=
curlycord

http://www.curlycord.com