replacing ip address to vr-mgmt port

[Dr.strange]

hello ,

how do you replace ip address of vr-mgmt port of x450 and its default route ?

 

[ADB100]

if you are connected via IP to the mgmt port then you can change the routes but not the mgmt VLAN IP address. You either need to connect via the serial console or via another an IP address assigned to another VLAN.
You have to 'unconfigure' the IP address on the mgmt VLAN and then 'configure' it.

unconfigure mgmt ipaddress
configure mgmt ipaddress 10.10.10.10/24

configure iproute delete default 10.10.10.1 vr VR-Mgmt
configure iproute add default 10.10.10.100 vr VR-Mgmt

Andy