I have to replace a i2007 on a BCM and it will not take the firmware update. The set is C3N and I am trying to get to C8J. I tried to let the set upgrade by itself and it would just loop. I found the previous tech's notes and it said to do a TFTP upgrade in 2 steps. I tried to do TFTP upgrade but as long as I had the S1 and S2 set to the BCM I could not get the TFTP address in before it would reboot. I had to keep trying to get into the config and take out the S1 and S2. Once I got it out I was able to get the TFTP upgrade info in and the cfg file would transfer successfully but I would get
Transfer of 'i2007.cfg' has successfully completed
"of type 'octet'is requested from xxx.xxx.xxx.xxx(set ip address)
>> 0: Undefined error
I have tried playing with the cfg file but nothing would change.
Any help with this would be greatly appreciated.
Transfer of 'i2007.cfg' has successfully completed
"of type 'octet'is requested from xxx.xxx.xxx.xxx(set ip address)
>> 0: Undefined error
I have tried playing with the cfg file but nothing would change.
Any help with this would be greatly appreciated.