Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Replacement batteries 1

Status
Not open for further replies.
activenew

activenew

Technical User
Apr 13, 2015
283
SA

Hello ,

I want to change batteries for our system, because the current batteries not working.
what should to do on the system to accomplish this?


Thanks
 
Sort by date Sort by votes
It might help if you say what the system is. What are the batteries you have currently (pun intended)?
 
Upvote 0 Downvote

thanks for reply,

our system is "Winfiol-MD110"

The current batteries :
Brand: YUASA
Model Number: NP38-12I
12V, 38Ah

I have bought the same batteries.
 
Upvote 0 Downvote
open circuit and replace with new . remeber open circuit from end of line then your md not go down because powered by rectifire 48vdc
 
Upvote 0 Downvote
I agree with inlsp05 but would add that you should ensure you have an up to date backup in case something goes wrong and the power gets disconnected.
 
Upvote 0 Downvote

Thank guys,

I have replace the batteries today, I has been disconnect the mainstream in order to test batteries
But batteries are not powered supply system (the system did not work), how to make batteries supply the system.

I have another problem, when the power goes out, the most exts blocked(not working), and this forces me to deblock this exts one by one

how to avoid this problem please?
<BLFDP:TYPE=EL;
FAULTY DEVICES
EQU BOARDID BLOCKING DISTMARK LINELOCK
001-0-40-10 118 B'0101010111101010 NO NO
001-0-40-20 118 B'0101010111101010 NO NO
001-0-40-04 118 B'0101010111101010 NO NO
001-0-40-18 118 B'0101010111101010 NO NO
001-0-40-03 118 B'0101010111101010 NO NO
001-0-40-14 118 B'0101010111101010 NO NO
001-1-30-18 118 B'0101010111101010 NO NO
001-1-30-08 118 B'0000000000001000 NO NO
001-1-40-20 118 B'0101010111101010 NO NO
001-2-30-02 118 B'0101010111101010 NO NO
001-2-30-10 118 B'0101010111101010 NO NO
001-2-40-31 118 B'0101010111101110 NO NO
001-2-40-27 118 B'0101010111101110 NO NO
001-2-40-29 118 B'0101010111101110 NO NO
001-2-40-30 118 B'0101010111101110 NO NO
001-2-40-26 118 B'0101010111101110 NO NO
001-2-40-21 118 B'0101010111101110 NO NO
001-2-40-22 118 B'0101010111101110 NO NO
001-2-40-23 118 B'0101010111101110 NO NO
001-2-40-09 118 B'0101010111101110 NO NO
001-2-40-28 118 B'0101010111101110 NO NO
001-2-40-16 118 B'0000000000000100 NO NO
001-2-40-17 118 B'0000000000000100 NO NO
001-2-40-25 118 B'0000000000000100 NO NO
001-2-40-11 118 B'0000000000000100 NO NO
001-2-40-12 118 B'0000000000000100 NO NO
001-2-40-13 118 B'0000000000000100 NO NO
001-2-40-04 118 B'0000000000000100 NO NO
001-2-40-08 118 B'0000000000000100 NO NO
001-2-40-10 118 B'0000000000000100 NO NO
001-2-40-01 118 B'0000000000000100 NO NO
001-2-40-02 118 B'0000000000000100 NO NO
001-2-40-03 118 B'0000000000000100 NO NO
001-2-40-20 118 B'0000000000000100 NO NO
001-2-40-24 118 B'0000000000000100 NO NO
001-2-40-00 118 B'0000000000000100 NO NO
001-2-40-19 118 B'0000000000000100 NO NO
001-2-50-00 118 B'0101010111101110 NO NO
001-2-50-01 118 B'0101010111101110 NO NO
001-3-40-31 118 B'0101010111101010 NO NO
001-3-40-28 118 B'0101010111101010 NO NO
001-3-40-29 118 B'0101010111101010 NO NO
001-3-40-30 118 B'0101010111101010 NO NO
001-3-40-25 118 B'0101010111101010 NO NO
001-3-40-26 118 B'0101010111101010 NO NO
001-3-40-27 118 B'0101010111101010 NO NO
001-3-40-22 118 B'0101010111101010 NO NO
001-3-40-23 118 B'0101010111101010 NO NO
001-3-40-24 118 B'0101010111101010 NO NO
001-3-40-19 118 B'0101010111101010 NO NO
001-3-40-20 118 B'0101010111101010 NO NO
001-3-40-21 118 B'0101010111101010 NO NO
001-3-40-17 118 B'0101010111101010 NO NO
001-3-40-18 118 B'0101010111101010 NO NO
001-3-40-13 118 B'0101010111101010 NO NO
001-3-40-14 118 B'0101010111101010 NO NO
001-3-40-15 118 B'0101010111101010 NO NO
001-3-40-10 118 B'0101010111101010 NO NO
001-3-40-11 118 B'0101010111101010 NO NO
001-3-40-12 118 B'0101010111101010 NO NO
001-3-40-07 118 B'0101010111101010 NO NO
001-3-40-08 118 B'0101010111101010 NO NO
001-3-40-09 118 B'0101010111101010 NO NO
001-3-40-04 118 B'0101010111101010 NO NO
001-3-40-05 118 B'0101010111101010 NO NO
001-3-40-06 118 B'0101010111101010 NO NO
001-3-40-01 118 B'0101010111101010 NO NO
001-3-40-02 118 B'0101010111101010 NO NO
001-3-40-03 118 B'0101010111101010 NO NO
001-3-50-30 118 B'0101010111101010 NO NO
001-3-50-31 118 B'0101010111101010 NO NO
001-3-50-20 118 B'0101010111101010 NO NO
001-3-50-23 118 B'0101010111101010 NO NO
001-3-50-29 118 B'0101010111101010 NO NO
001-3-50-17 118 B'0101010111101010 NO NO
001-3-50-18 118 B'0101010111101010 NO NO
001-3-50-19 118 B'0101010111101010 NO NO
001-3-50-14 118 B'0101010111101010 NO NO
001-3-50-15 118 B'0101010111101010 NO NO
001-3-50-16 118 B'0101010111101010 NO NO
001-3-50-11 118 B'0101010111101010 NO NO
001-3-50-12 118 B'0101010111101010 NO NO
001-3-50-13 118 B'0101010111101010 NO NO
001-3-50-08 118 B'0101010111101010 NO NO
001-3-50-09 118 B'0101010111101010 NO NO
001-3-50-10 118 B'0101010111101010 NO NO
001-3-50-05 118 B'0101010111101010 NO NO
001-3-50-06 118 B'0101010111101010 NO NO
001-3-50-07 118 B'0101010111101010 NO NO
001-3-50-02 118 B'0101010111101010 NO NO
001-3-50-03 118 B'0101010111101010 NO NO
001-3-50-01 118 B'0101010111101010 NO NO

END
<
TIME OUT WARNING


Thanks
 
Upvote 0 Downvote

Implement the command below in order to make exts work

<BLEQE:EQU=001-3-50-07,ALLFM=Yes;
EXECUTED
<BLEQE:EQU=001-3-50-08,ALLFM=Yes;
EXECUTED
<BLEQE:EQU=001-3-50-09,ALLFM=Yes;
EXECUTED
<BLEQE:EQU=001-3-50-10,ALLFM=Yes;
EXECUTED
<BLEQE:EQU=001-3-50-11,ALLFM=Yes;
EXECUTED
<BLEQE:EQU=001-3-50-12,ALLFM=Yes;
EXECUTED
<BLEQE:EQU=001-3-50-13,ALLFM=Yes;
EXECUTED
<BLEQE:EQU=001-3-50-14,ALLFM=Yes;
EXECUTED
<BLEQE:EQU=001-3-50-15,ALLFM=Yes;
EXECUTED
<BLEQE:EQU=001-3-50-16,ALLFM=Yes;
EXECUTED
<BLEQE:EQU=001-3-50-17,ALLFM=Yes;
EXECUTED
<BLEQE:EQU=001-3-50-18,ALLFM=Yes;
EXECUTED
<BLEQE:EQU=001-3-50-19,ALLFM=Yes;
EXECUTED
<BLEQE:EQU=001-3-50-20,ALLFM=Yes;
EXECUTED
<BLEQE:EQU=001-3-50-23,ALLFM=Yes;
EXECUTED
<BLEQE:EQU=001-3-50-29,ALLFM=Yes;
EXECUTED
<BLEQE:EQU=001-3-50-30,ALLFM=Yes;
EXECUTED
<BLEQE:EQU=001-3-50-31,ALLFM=Yes;
EXECUTED
<BLEQE:EQU=001-3-40-01,ALLFM=Yes;
EXECUTED
<BLEQE:EQU=001-3-40-02,ALLFM=Yes;
EXECUTED
<BLEQE:EQU=001-3-40-03,ALLFM=Yes;
EXECUTED
<BLEQE:EQU=001-3-40-04,ALLFM=Yes;
EXECUTED
<BLEQE:EQU=001-3-40-05,ALLFM=Yes;
EXECUTED
<BLEQE:EQU=001-3-40-06,ALLFM=Yes;
EXECUTED
<BLEQE:EQU=001-3-40-07,ALLFM=Yes;
EXECUTED
<BLEQE:EQU=001-3-40-08,ALLFM=Yes;
EXECUTED
<BLEQE:EQU=001-3-40-09,ALLFM=Yes;
EXECUTED
<BLEQE:EQU=001-3-40-10,ALLFM=Yes;
EXECUTED
<BLEQE:EQU=001-3-40-11,ALLFM=Yes;
EXECUTED
<BLEQE:EQU=001-3-40-12,ALLFM=Yes;
EXECUTED
<BLEQE:EQU=001-3-40-13,ALLFM=Yes;
EXECUTED
<BLEQE:EQU=001-3-40-14,ALLFM=Yes;
EXECUTED
<BLEQE:EQU=001-3-40-15,ALLFM=Yes;
EXECUTED
<BLEQE:EQU=001-3-40-16,ALLFM=Yes;
 
Upvote 0 Downvote
Thank you for reply ,


I want say this a problem occur frequently . 3 weeks ago the power totally gone, for this reason i have been replaced the batteries, but the new batteries does not provide power for the system i don't know why.

when power outage , most Exts are blocked(not working), really i don't know why the power outage, i need your help to avoid this issue.

Thank again.
 
Upvote 0 Downvote
YOUR POWER MOST +48vdc if down this voltage system not working and if high rg5dc may be damaged . 4 battery series 12 vdc tottaly 48vdc
if you need more hours keep system up use more battery but parallel finally you need 48 vdc and you can add more battery with parallel
 
Upvote 0 Downvote
Your power have 4 module and now you just have 1 module with 2 fuses . Voltage is ok . Show 55 v but 4*12v battery insude your rack.
Just disconect battety from power module replace by new and conect again this is too easy work. I chanfe that under 30 minutes....[highlight #FCE94F][/highlight]
 
Upvote 0 Downvote

I did not understand, but i have been connected 4 pecs each one equal (12)

i am confused ,Can you please write up your request above in the other way.


Thank for you "inlsp05"
 
Upvote 0 Downvote

I've actually bought new batteries and has been connected to the system, but did not provide any power to the system
when remove the main power to test new batteries after connected working or not.


could you please check keys(f1 , f2 ,f3.....)shown in screenshot,Is the current situation for keys correct ?

thanks again
 
Upvote 0 Downvote

Because the person who replaced batteries has changed somewhat in these keys, he was trying to make the batteries supply system
Does this have an impact?
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

aaa931
  • Locked
  • Question
MD 110 battery replacement
Replies
1
Views
57
woolwich
woolwich
lalrl
  • Locked
  • Question
ECA - what is the replacement-product?
Replies
2
Views
54
doktor
doktor
djkebner
  • Locked
  • Question
DUSYI Failes with replacement hard drive on HDU6 card
Replies
0
Views
58
djkebner
djkebner
bb34nne
  • Locked
  • Question
Batteries MD110
Replies
10
Views
84
merlin3355
merlin3355
Gosy
  • Locked
  • Question
Replacement batteries for MD110
Replies
4
Views
66
slash50
slash50

Part and Inventory Search

Sponsor

Back
Top