Hi I have an LG LDK 100 PSU power supply board that after replacing it C48, C49, C44, R50 Q3 the fuses are intact and there is no other short to terminal CN3 there is no power supply but if I input voltage to CN2 24V I have tension at "cn3", can someone help me THANK YOU.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Repair LG LDK 100 PSU
- Thread starter tecdigi
- Start date
mellowamoya
Systems Engineer
Does anyone have a schematic for the LDK-100 PSU I have one to repair and some of the components are burnt so cannot read there value so i am unable to find replacements.
Does anyone know of a replacement for this power supply.
Thanks
Does anyone know of a replacement for this power supply.
Thanks
Dean Telecom
Systems Engineer
I have a contact who can repaiar them who i have used a lot in the past if that helps?
- Status