Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Renumbering HDS Luns

Status
Not open for further replies.

jaggerd

MIS
Apr 11, 2006
10
US
Hey All


I have a pair of LUNS which are shared for HA purposes, between 2 systems. They are showing as dlmfdrv64 and dlmfdrv65 on one system, but aren't showing up on the second system. When cfgmgr was run on the secondary node again, they brought up the dlmfdrv64 and dlmfdrv65 with different LU's, so everything is out of sequence on the secondary node.

How do we "hide" or renumber the LUNs so that we can get them back into numerical sequence?

Thanks
 
If you keep them like that it won't hurt the functionality! It is only not neat!

You will have to rmdev -d each LUN on both nodes and then do a cfgmgr again.

Regards,
Khalid
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top