Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Removing NFS Programming

Status
Not open for further replies.

buthead

Technical User
Jul 1, 2005
59
US
Hello Team,
It's been awhile, and I need your assistance. I have an 81C, 5.5 running, 2 spans, Loop 3 DCH 4 as Primary and Loop 2 DCH 0 as Bkup. I am consolidating these two into 1 span The DDB showed 2 as a primary reference and 3 as the secondary reference. I changed the secondary reference to another loop but I don't think thats necessary since the Telco is no longer needing a backup once we cut over. My plan was to connect the new Virtual PRI to Loop 2, change the name of the adan, and call it a day. Your thought please.
Thanks in advance,
Buthead
 
The NFS and your clocking are 2 different things, and yes you only need one clock reference but you will probably have to out the existing D-channels and just build one back.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top