Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Removing NAT !!!
- Thread starter tattl
- Start date
go into the serial interface an type ( no ip nat outside )
on the ethernet ( no ip nat inside )
in global type example
(no ip nat inside source list 1 interface serial0/0.1 overload )
no access-list 1 permit any <-- or whatever your using
wr mem <-- save config to nvram Jeter@LasVegas.com
Fisher CCNA
Sprint-Data
on the ethernet ( no ip nat inside )
in global type example
(no ip nat inside source list 1 interface serial0/0.1 overload )
no access-list 1 permit any <-- or whatever your using
wr mem <-- save config to nvram Jeter@LasVegas.com
Fisher CCNA
Sprint-Data
- Status