Removing from Group Hunt

[MikeeOK]

Hi

I am trying to out a 2616 but need to remove it from its Group Hunt fist. How do I do that?

Running 21.4 on a 61.

I cant seam to out more than 1 2616 at a time. tried out 16 but it just removed the first one. i am wanting to do this so I can change them to 500 types.

Thanks for your help.

Mike

 

[Reusser]

you can only remove one at a time - for analog you can do more than one at a time.

 

[wdhb]

Use LD20 to PRT group hunt lists. Remove from list in LD18

>ld 20
REQ: prt
TYPE: ght
LSNO
GHLN 0006
GHT
PLDN 2001
DNSZ 16
STOR 0 2602
STOR 1 2601
STOR 2
STOR 3
STOR 4

 

[MikeeOK]

Thanks

Had a look at that. What order do I need to use to remove them?

Ta

Mike

 

[cmawbey]

In order to add or remove an extn number from a group hunt list you need to know the list number (LSNO)and the store entry number (STOR within the list. You will need to use this procedure if you get a SCH8825 message when changing a TN.
You can get this information by printing the Group Hunt Lists in overlay LD 20.
REQ PRT
TYPE GHT
LSNO (c/r for all the lists or enter the list no)
Check the print out to obtain the correct information.

The changes are made in LD 18.

REQ CHG
TYPE GHT
LSNO (enter the list number which requires changing this is the GHLN from the above print out)
SIZE (c/r)
WRT (c/r)
STOR enter the store number concerned then space then the extentsion (DN) number
STOR XX YYYY for example
WRT (c/r) Yes to update the list.

To remove an entry at the STOR prompt
STOR enter the store number, space(c/r)
STOR XX space bar
WRT (c/r)
Carriage return through to the REQ prompt.

The information below will assist with the removal of a PLDN (Pilot DN), please be careful at the ALL command and enter no as directed:

LD 57

REQ out
TYPE ffc
CUST 0
ALL no
CODE pldn
PLDN (enter the number you wish to remove)
PLDN (use the enter key until the REQ prompt appears)



Colin

 

[mikeyb123]

if you wish to quicken the process you can change the size of the hunt group.

so if you have a list of 10 phones and you want to get rid of all them you can chg the size prompt to one and then remove the remaining entry

It's not getting any smarter out there. You have to come to terms with stupidity, and make it work for you.