removing Digital trunk card from programming

[wildbill99]

I work at the phila. folk fest. We got a donation of a Op11c to replace our SL-1. I am removing/changing the programming in The Op11c. I can chg or out the Analog and digital line cards and Universal Trunk cards.
But I can not remove the Digital trunk card Programming, which we will not have. I would just start from a clean load but we did not get the pcmia card with the system. I am pretty good with the old SL-1 , But Op11c is new to me. Thanks

 

[acewarlock]

LD 22
PRT
CFN_CEQU

See what DLOP is
------------------------------------------------------------

LD 17
CHG
CFN_CEQU
DLOP X ??

 

[Sennback]

You can restore an empty database and start from there.
This does not need a pcmcia card.
You can upload it from your pc.

We use our own databases when we start to program our op11c.
It contains all parameters necessary plus one ISDN pri system.
I could mail you one of those and instructions, but it isn't that easy. Our database is natruly country specific as tone-tables and such are different.
Tell me if this could be of any interest.
I need to know what release you have on the software in your pbx.