Removing call forwarding and restrictions on extension

[madmonkeys]

Hey guys,

I have an extension with a dn of 111.

To cut the story short I need to remove this extension from any hunt group and to remove any call forwarding restrictions so that it can just be a normal extension. I have printed the TN below. I would be grateful if you could give me some instructions on what to do.

Before I do this though is there a way in checking that this extension is not playing a key part in any hunt group? And how can I find why cfw is set to 23 as this is not an extension (there is no pulse dialling tone and doing #1 does not remove it).

DES 327
TN 015 0 00 10
TYPE 500
CDEN 4D
CUST 0
WRLS NO
DN 111 0 MARP
AST NO
IAPG 0
HUNT 327
TGAR 1
LDN NO
NCOS 3
SGRP 0
RNPG 4
LNRS 16
XLST
SCI 0
SCPW 1111
CLS TLD DTN FBD XFA WTA FNA HTA ONS
LPR XRA CWD SWD PUA MWA LPD XHD CCSD LNA TVD
CFTA SFA MRD C6A CNID AUTU
ICDD CDMD EHTD MCTD
GPUA DPUA CFXA ARHA OVDD AGTD CLTD LDTD ASCD
MBXD UDI HBTA DDGA NAMA MIND
NRWD NRCD NROD CRD PRSD MCRD
EXR0 SHL SMSD ABDD CFHD DNDY DNO3
CWND USRA BNRD OCBD RTDD FAXD PGND FTTU
RCO 0
PLEV 00
AACS NO
MLWU_LANG 0
FTR CFW 23
FTR SCC 0327
FTR SSU 0010
FTR PHD
FTR FDN 327
FTR EFD 327
FTR EHT 327
FTR RDL 16
DATE 28 FEB 2005

 

[johnpoole]

ld 10
chg
500
10 15
echg yes
cls htd fnd cftd unr
hunt x327
ncos 7

that would be a best guess, usually ncos 7 is non restricted. prt the tnb of a simular set to verify the tgar and ncos


john poole
bellsouth business
columbia,sc

 

[mluckie1]

To remove the CFW after ECHG Yes enter
ITEM FTR XCFW 4 return
FTR return
ITEM

 

[johnpoole]

matters not, cls mwd will blow it away to, the ftr fdn quits working with fnd cfxd.. the ftr just stays to confuse you

john poole
bellsouth business
columbia,sc