Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Removing area code when dialing from call log

Status
Not open for further replies.

evoguy

IS-IT--Management
Mar 31, 2007
52
BB
Hi Guys,

Its a while since i have configured an IP office. i have one small issue. When a call is made from the call log on the IP phone the area code is infrint of the seven digit number. how do I strip the area code and append 9 before the number, to dial from my call log?
 
you need to go to the line settings and in the prefix set 0,00 with 9,90,900
prefix, national,international

this way the 9 appears in the call log to allow you to dial out the number.
it dials 9 followed by the number.

 
Look at the section titled "Special ARS considerations for area codes that begin with a 9 in 7 digit dialing areas (e.g. 949)"


Kyle Holladay / IPOfficeHelp.com
ACSS/ACIS/APSS Avaya SME Communications
APDS Avaya Data
MCP/MCTS Exchange 2007/2010
Adtran ATSA, Aruba ACMA

"Thinking is the hardest work there is, which is the probable reason why so few engage in it." - Henry Ford
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top