Removing an LSP 2

[Phoneman2]

We closed two location over the summer an now have a SP-REG-M alarm. I still show the two LSP's in the li SUR report. I need to remove then.

Wisdom is Knowledge
that is Shared

Thanks All Phoneman2

 

[Mitch672]

you need to "remove" all of the cards from them first, that means X-porting (set the port to "X") and any stations in the gateways. Next remove any trunk group members from any trunk groups for those locations, then remove the signalling groups associated with them. The remove any DS1 forms for MM710 cards for those locations. Next, do a "change sys features", and disable TTI (this will then allow for the removal of the cards), then go in and "change gateway x" (x= the gateway #), and remove the circuit packs. Once all of the circuit packs are gone, you should be able to remove the media gateway. 1 more thing, just before you remove the media gateway, remove the LSP via "remove survivable xyzzy" (which is the node-names of that S8300C LSP), that should be about it... You have to remove any hardware for those locations, before you can delete it..

Mitch


Mitch

AVAYA Certified Expert