Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Removing Alarms in MX-ONE TSE

Status
Not open for further replies.

cpux10

Technical User
May 27, 2006
104
IR
Hi,

Does anyone know what the equivalent for the "ALDAR" command would be in MX-ONE TSE (to prevent an alarm code from showing up in the alarm list printout)?

Thanks...
 
look at files:

/opt/eri_sn/etc/alarm_severity.conf
/opt/eri_sn/etc/alarm_text.conf

be sure to modify all files in all lims

/Daddy

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!
 
Thanks Daddy, but I could only change the alarm text and severity in these two files. I also tried removing one line and restarting the system, but it didn't help.

Any ideas?
 
alarm_cf_reread is enough after file modification.

If I remember correctly, you can't remove these alarms and these files only provide the old MD110 alarms.

Newer TSE versions provide alarm_cfg command.
use alarm_cfg -help for more info.

/Daddy

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top