Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Removing a shelf

Status
Not open for further replies.

grnichol

Technical User
Feb 17, 2009
77
US
OPT 81 /cs1000
I have a shelf I would like to remove. All line cards have been outed and removed except for the DTR card. What need to be done to remove this card and out this shelf so it can be removed?
 

OUT DTRs in LD 13 (see the book section LD 13)

Poke around LD97 SUPL and LD17 CEQU

I'm sure someone who outs shelves more often can further detail the other points.

--
Nortel Resources at GHTROUT.com World Famous!
--
 
Yep, out the DTR's in ld 13 and remove the superloop in ld 97.
 
yes, remove the superloop and xpec, dtr and you should be fine.
 
Thanks for all the help I have the Super loop removed and the dtr.
what are the commands to remove the xpec.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top