removeing a vid card from a nam

[loadingcoil]

i am installing a vid card on a nam to enable me to install a nic card. after i am finish i would like to take the vidcard out how could i do this

thanks much
loading coil

 

[canadianwolf]

Why go through the bother of installing then removing the video card just to install a network card? There is a floppy that you can use to set all the NIC parameters, and it takes 10 minutes all told. The program to make the floppy is called Nam IPlite.

 

[NTL555]

I remember this one. IP Lite wont allow you to change a NIC card not originally in the NAM.

Change your ip address, then disable monitor package. Turn dip switch 8 back off and then boot up.

I dont know why you would do that either. If you wanted to change the IP address you have to start from square one again.