remove SDRR to allow calls to go out normally

[fishhead64]

Dialing 9171750815x calls are locally terminating. I removed the SDRR of 15 and it didn't change anything. I have no SDRR in NPA 1717, only NXX 508.
Thoughts?

NXX 508
RLI 1 (nothing special going on here)
DMI 1 (DEL 3)
LDID 15 <<=== I removed this, still keeps 9171750815x on switch

LDID 51

LDID 59

SDRR LDID CODES = 3
ITEI NONE

NPA 1717
RLI 5 (nothing special here)
SDRR NONE
ITEI NONE

 

[Firebird Scrambler]

Make sure that your local DID's have CLS = UDI as this would prevent them from ringing in.

Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website =

http://somertel.net

linkedin

 

[fishhead64]

We're not trying to get them to ring in. I want the call to go out normally to the PSTN and terminate on our new system. My DID has been ported to a new carrier and phone system. When I call it on my cell, it rings the new system properly. When I call out on the Nortel phone, it rings on my old Nortel phone, the call isn't leaving the Nortel PBX.

 

[StanleySteamer]

Could it be that 9 is AC2 and you are looking at the NPA in AC1, or vice versa?
Also, do you actually dial 91717508xxxx for a number in your free calling area? Could it be simply NPA 717, not 1717?

 

[bignose21]

Have you got Zone Based Dialplan enabled and any entries in ZFDP?