Remove "+" trunk SIP CM 6.3

[Davicat]

Hello,

I'm finding a problem with my Avaya CM 6.3 system.

we have interconnected our Avaya switchboard through an integrated SBC with 4 more technologies.

At the moment, Qsig passes the numbers and names correctly, when we create a trunk sip against the SM it always adds a "+" in front of the extension and the name is not added.

You know what I could try? I've been looking and I suggest I change the Prepend "+" in the signaling group to no, but it changes to Y automatically when you link to the SM

This parameter has also been disabled in the trunk

Thank you very much.

 

[kyle555]

you can make an adaptation and then apply that adaptation to the CM SIP entity

That adaptation could be of type digitconversionadapter and on egress match + with min/max digits - for example you'd put min/max 11/12 (counting the +) if you wanted to drop the + on 555-555-1234 and 1-555-555-1234 and there's a spot to 'delete' and you'd put 1 to 'delete the first digit starting from the left'