Remove old Intuity translations?

[TelecomDept]

I had a new LX Intuity installed and connected. At the time I left the old Intuity on the system to run the new and old side by side a few weeks for the users. The time has come to remove the old Intuity.

Audix Names IP Address
audix1 172.18 .2 .33
When attempting to remove the node-name I get this message.
Command: change node-names audix
Response: " " Remove name from forms containing AUDIX Names first.
------

So I ran this
command: list usage node-name audix1
response : No data in the system to list
--------

The name has been removed from hunt groups, stations, and the communication-interface processor-channels form. Any help on this remove name from forms containing AUDIX Names first would be appreciated.

This also makes me wonder if I am in need of adding the name of the new Intuity on this same form?

 

[PBXTech]

what is the audix name in the node-names field of the LX.

 

[TelecomDept]

AUDIX NODE NAMES

Audix Names IP Address
OKC-AI 10 .16 .2 .229
audix1 172.16 .201.160

 

[PBXTech]

what is OKC-AI? better yet, log into the LX and post what the ip address is of it.

 

[TelecomDept]

The LX is not in question here. OKC-AI is not in question here.

The question is what form in the PBX would have the Audix name - what form other than the node-name audix form ?

It is the audix1 that I am attempting to remove from the PBX.

 

[PBXTech]

fine.
go into each one of your non-meet me VDNs. page 2. take out the AUDIX1 that's there.

 

[AvayaTier3]

log this to a file (capture what comes across your screen)
spaces between field data below is really a tab and not spaces

Output from this will show what is still associated with
the audix1

Command: newterm
Terminal Type (513, 715, 4410, 4425, VT220, NTT, W2KTT, SUNT): ossi
clist hunt
f0011ff00       0fa4ff00        0fa1ff00
t
clist term
f0029ff00       0fa9ff00
t
clist agent
f0fa1ff00       0fb3ff00
t
clist sta
f8005ff00       0faaff00
t
clist vdn
f8005ff01       0fa3ff00
t
cnewterm
t
Terminal Type (513, 715, 4410, 4425, VT220, NTT, W2KTT, SUNT): 4410

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

35 years Bell, AT&T, Lucent, Avaya
Tier 3 for 25 years and counting

http://bshtele.com

 

[TelecomDept]

Thanks AvayaTier3,

That looks like a sat session command (not shell) ...
term ossi locks up the screen

command: newterm

respnse: Terminal Type (513, 715, 4410, 4425, VT220, NTT, W2KTT, SUNT): [513]
-----
input ossi and enter

output: t
.... (on far right of screen)

screen now frozen