Remove of a magazine BC7 1

[kings1]

Hello,

I want to remove a magazine in a lim. I remove all the boards in the magazine and unplug the LSU-DSU cable. After a SFCEI the magazine is still there in the CNLIP.

How can i solve this problem?

Regards,
Kings

 

[HIREI]

Hello,

why not to follow instructions from Alex/DynaText in CN-command group?

 

[mundus]

Hi' could you make this:
SACOP:LIM=1,UNIT=DCP,ADDR=3039&&303C;
and
CADAP;

 

[kings1]

Hello,

@Hirei : I follow the instructins in the CN groep.

@mundus : Here is printout from SACOP

<SACOP:LIM=1,UNIT=DCP,ADDR=3039&&303C;
MEMORY CONTENT ON ADDRESS POSITION
EXE A

ADDR 0 1 2 3 4 5 6 7 8 9 A B C D E F ISO
3030 43 4E 66 BB 00 F9 FA 01 00 00 00 01 01 F8 01 FF CNf.............
END

I checked plexview and find out that 303E and 303F must be 00 FF when you have one magazine.

Kings