I am trying to chg a number on a wireless phone that the type is a DCS (what is that) and it will not let me because it says to remove the number from the GHT list 1st. I have tried outing and rebuilding as well and I get the same SCH8852. I can build a 3904 and use the target number (7268) but it will not let me do anything with (DCS). Help please.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Remove From GHT
- Thread starter optionman
- Start date
acewarlock
Technical User
Can you show use a scan of what you have been trying to do?
SCH8852 ESN data block does not exist.
This is a Signature and not part of the answer, it appears on every reply.
This is an Analogy so don't take it personally as some have.
Why change the engine if all you need is to change the spark plugs.
SCH8852 ESN data block does not exist.
This is a Signature and not part of the answer, it appears on every reply.
This is an Analogy so don't take it personally as some have.
Why change the engine if all you need is to change the spark plugs.
bigindian65
Technical User
How ironic, I just posted ght info. If you want to remove it from the hnt group so you can use it, the instru are here
In order to add or remove an extn number from a group hunt list you need to know the list number (LSNO)and the store entry number (STOR within the list. You will need to use this procedure if you get a SCH8825 message when changing a TN.
You can get this information by printing the Group Hunt Lists in overlay LD 20.
REQ PRT
TYPE GHT
LSNO (c/r for all the lists or enter the list no)
Check the print out to obtain the correct information.
The changes are made in LD 18.
REQ CHG
TYPE GHT
LSNO (enter the list number which requires changing this is the GHLN from the above print out)
SIZE (c/r)
WRT (c/r)
STOR enter the store number concerned then space then the extentsion (DN) number
STOR XX YYYY for example
WRT (c/r) Yes to update the list.
To remove an entry at the STOR prompt
STOR enter the store number, space(c/r)
STOR XX space bar
WRT (c/r)
Carriage return through to the REQ prompt.
LSNO can be more or less any number, mine start at 50 it's not a DN just a number used to id a list
DNSZ is the size of your DN's eg 2 digit or 3 digit or 4 digit .....
SIZE - is how many entries will there be in the hunt group ( if you build a group that has 5 users ) you can set it to 5 or more, 10 maybe to allow for additional members.
STOR this is where you enter your members DN's STOR 0 is first then you get STOR 01 up to the value of SIZE ....
Just C/R past WRT
Mato' Was'aka
In order to add or remove an extn number from a group hunt list you need to know the list number (LSNO)and the store entry number (STOR within the list. You will need to use this procedure if you get a SCH8825 message when changing a TN.
You can get this information by printing the Group Hunt Lists in overlay LD 20.
REQ PRT
TYPE GHT
LSNO (c/r for all the lists or enter the list no)
Check the print out to obtain the correct information.
The changes are made in LD 18.
REQ CHG
TYPE GHT
LSNO (enter the list number which requires changing this is the GHLN from the above print out)
SIZE (c/r)
WRT (c/r)
STOR enter the store number concerned then space then the extentsion (DN) number
STOR XX YYYY for example
WRT (c/r) Yes to update the list.
To remove an entry at the STOR prompt
STOR enter the store number, space(c/r)
STOR XX space bar
WRT (c/r)
Carriage return through to the REQ prompt.
LSNO can be more or less any number, mine start at 50 it's not a DN just a number used to id a list
DNSZ is the size of your DN's eg 2 digit or 3 digit or 4 digit .....
SIZE - is how many entries will there be in the hunt group ( if you build a group that has 5 users ) you can set it to 5 or more, 10 maybe to allow for additional members.
STOR this is where you enter your members DN's STOR 0 is first then you get STOR 01 up to the value of SIZE ....
Just C/R past WRT
Mato' Was'aka
- Thread starter
- #4
Bigindian, I printed out my GHT but i am having trouble cross referencing the info from the GHT and the phone. Below is my print out.
REQ: prt
TYPE: tnb
TN 61 21
DATE
PAGE
DES
DES DECT
TN 061 0 00 21 PHANTOM
TYPE DCS
CDEN 8D
CUST 0
WRLS YES
WTYP DECT
MWUN 32
DMC 8
INDX 22
VSIT NO
DN 7256 0 MARP
CPND
CPND_LANG ROMAN
NAME MICHAEL SCOTT
XPLN 24
DISPLAY_FMT FIRST,LAST
AST NO
IAPG 0
HUNT 7225
TGAR 0
LDN NO
NCOS 4
SGRP 0
RNPG 1
LNRS 16
XLST
SCI 0
SCPW 2222
SFLT NO
CAC_MFC 0
CLS TLD DTN FBD XFD WTA THFD FNA HTA ONS
LPR XRA CWD SWD PUA MWA RMMD SMWD LPA XHD SLKD CCSD LNA TVD
CFTD SFD MRD C6A CNID CLBD AUTU
ICDD CDMD EHTD MCTD
GPUD DPUA CFXA ARHD OVDD AGTD CLTD LDTD ASCD
TSA MBXD CPFA CPTA UDI RCC HBTD IRGD IAMD DDGA NAMA MIND
NRWD NRCD NROD CRD PRSA MCRD EXR0 SHL ABDD CFHD DNDY DNO3
USRD CNDA BNRD OCBD RTDD RBDD RBHD FAXD PGND FTTC
FDSD NOVD
RCO 0
PLEV 02
AACS NO
MLWU_LANG 0
FTR CFW 16
FTR SSU 0000
FTR FDN 7225
FTR ADL 16
DATE 10 SEP 2007
NACT
REQ:
REQ PRT
TYPE: ght
LSNO
GHLN 0001
GHT
PLDN 7201
DNSZ 16
STOR 0 7252
STOR 1 7241
STOR 2 7251
STOR 3 7248
GHLN 0002
GHT
PLDN 7202
DNSZ 16
STOR 0 7240
STOR 1 7238
STOR 2 7242
STOR 3 7261
STOR 4 7225
STOR 5
GHLN 0003
GHT
PLDN 7203
DNSZ 16
STOR 0 7233
STOR 1 1200
STOR 2 7257
GHLN 0004
GHT
PLDN 7204
DNSZ 16
STOR 0 7231
STOR 1 7249
STOR 2 7250
STOR 3 1200
STOR 4
GHLN 0005
GHT
PLDN 7205
DNSZ 20
STOR 0 7256
STOR 1 7258
STOR 2 7259
STOR 3 7262
STOR 4
REQ:
REQ: prt
TYPE: tnb
TN 61 21
DATE
PAGE
DES
DES DECT
TN 061 0 00 21 PHANTOM
TYPE DCS
CDEN 8D
CUST 0
WRLS YES
WTYP DECT
MWUN 32
DMC 8
INDX 22
VSIT NO
DN 7256 0 MARP
CPND
CPND_LANG ROMAN
NAME MICHAEL SCOTT
XPLN 24
DISPLAY_FMT FIRST,LAST
AST NO
IAPG 0
HUNT 7225
TGAR 0
LDN NO
NCOS 4
SGRP 0
RNPG 1
LNRS 16
XLST
SCI 0
SCPW 2222
SFLT NO
CAC_MFC 0
CLS TLD DTN FBD XFD WTA THFD FNA HTA ONS
LPR XRA CWD SWD PUA MWA RMMD SMWD LPA XHD SLKD CCSD LNA TVD
CFTD SFD MRD C6A CNID CLBD AUTU
ICDD CDMD EHTD MCTD
GPUD DPUA CFXA ARHD OVDD AGTD CLTD LDTD ASCD
TSA MBXD CPFA CPTA UDI RCC HBTD IRGD IAMD DDGA NAMA MIND
NRWD NRCD NROD CRD PRSA MCRD EXR0 SHL ABDD CFHD DNDY DNO3
USRD CNDA BNRD OCBD RTDD RBDD RBHD FAXD PGND FTTC
FDSD NOVD
RCO 0
PLEV 02
AACS NO
MLWU_LANG 0
FTR CFW 16
FTR SSU 0000
FTR FDN 7225
FTR ADL 16
DATE 10 SEP 2007
NACT
REQ:
REQ PRT
TYPE: ght
LSNO
GHLN 0001
GHT
PLDN 7201
DNSZ 16
STOR 0 7252
STOR 1 7241
STOR 2 7251
STOR 3 7248
GHLN 0002
GHT
PLDN 7202
DNSZ 16
STOR 0 7240
STOR 1 7238
STOR 2 7242
STOR 3 7261
STOR 4 7225
STOR 5
GHLN 0003
GHT
PLDN 7203
DNSZ 16
STOR 0 7233
STOR 1 1200
STOR 2 7257
GHLN 0004
GHT
PLDN 7204
DNSZ 16
STOR 0 7231
STOR 1 7249
STOR 2 7250
STOR 3 1200
STOR 4
GHLN 0005
GHT
PLDN 7205
DNSZ 20
STOR 0 7256
STOR 1 7258
STOR 2 7259
STOR 3 7262
STOR 4
REQ:
- Thread starter
- #5
bigindian65
Technical User
maybe (???) because it is a phantom & hnt/fdn to 7225 it will not let you manipulate it.
GHLN 0002
GHT
PLDN 7202
DNSZ 16
STOR 0 7240
STOR 1 7238
STOR 2 7242
STOR 3 7261
STOR 4 7225
Mato' Was'aka
GHLN 0002
GHT
PLDN 7202
DNSZ 16
STOR 0 7240
STOR 1 7238
STOR 2 7242
STOR 3 7261
STOR 4 7225
Mato' Was'aka
- Thread starter
- #7
bigindian65
Technical User
cool, good. I didn't notice it in 0005 til a minute ago & we replied at the same time. Glad it is good to hook.
Mato' Was'aka
Mato' Was'aka
- Status
Similar threads
- Locked
- Question
- Locked
- Question