Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Remove blade warning

Status
Not open for further replies.
MoreFeo

MoreFeo

Technical User
Nov 29, 2002
547
ES
Hello,

We've got a Blade Center H Chassis. It came with 2 Ethernet switches and 2 FC switches. Now we've added the 2 multi-switch interconnect modules in bays 7-8 and 9-10, with 2 additional Cisco Ethernet switches.

The issue we're having is that we've moved the 2 FC switches to the multi-switch modules, and now the AMM complains about I/O modules 3 and 4 that have been removed (the 2 FC switches we've moved).

Is there a way to erase those events, and clean the warning?

Thanks.
 
Status
Not open for further replies.

Similar threads

newBie2019
  • Locked
  • Question
RDP Certification Warning
Replies
0
Views
173
newBie2019
newBie2019
Marvin111
  • Locked
  • Question
SUN BLADE 1500 / Booting problem
Replies
0
Views
203
Marvin111
Marvin111
bludbunny
  • Locked
  • Question
Setting up an additional HS21 Blade and drives
Replies
0
Views
106
bludbunny
bludbunny
wmil1105
  • Locked
  • Question
GbE2c Ethernet Blade Switch for HP c-Class BladeSystem
Replies
1
Views
90
biglebowski
biglebowski
kfisher01
  • Locked
  • Question
No blade ProLiant BL20p G3 showing in chassis
Replies
5
Views
109
blister911
blister911

Part and Inventory Search

Sponsor

Back
Top