remove base extention unit

[inlsp01]

hi all;
i have tsw sp8 i need remove base extention unit ihave alarm for taht because before was in system and now base no in system

CLASS: 2
349 FAULTY RFP FOR DECT FIXED PART
DATE TIME ALP NOIF UNIT EQU BRDID INF1 INF2 INF3
13AUG14 09:28:53 1 1 CTLP 001-2-50-00 121 476


regard

 

[snor]

Hi,
you can remove a unit with "LAPUR:unit=xx,LIM=yy;" if there are no programed data left for this unit.
SFCEI; is needed to update the tables.

my suggestion to clean a unit is following :
DUPUI :UNIT= ,LIM= ;
LAPUR :LIM=...,UNIT= ;
SFCEI ;
LAPUL :LIM=...,UNIT= ;
SFCEI ;
SFPUI :LIM=...,UNIT=...;

P.S.
it also might be possible, that the Alarm 349 is hanging in the Alarm programm (ALR, ALM)
try to :
remove alarm 349 with "ALDAR :CODE=...; "
restart ALR (in all LIM) and ALM
reconfigure alarm 349 "ALDAS:.... and check, if alarm comes back in the alarm-log.

best regards,
Norbert

 

[whosrdaddy]

Norbert,

he just want to remove the base station.
Typically this is done through the CXRFE:FPI=X,RPB=Y; command.
To print the base stations use CXRFP:FPI=ALL,RPN=ALL;

/Daddy

-----------------------------------------------------
Helping people is my job...