Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
remove a server cleanly from san
- Thread starter djessi
- Start date
In the reverse order you attached it to the SAN
1. Dismount the disk (remove drive letter)
2. Remove host from Server Group.
3. Rescan on server to remove disk from disk management.
4. Remove NaviAgent from Server.
5. Remove Zone from ZoneSet.
4 & 5 can be done either way round, I'd say.
Jon
1. Dismount the disk (remove drive letter)
2. Remove host from Server Group.
3. Rescan on server to remove disk from disk management.
4. Remove NaviAgent from Server.
5. Remove Zone from ZoneSet.
4 & 5 can be done either way round, I'd say.
Jon
- Thread starter
- #3
Right click on "My Computer"
Select "Manage"
From left pane select Computer Management
On bottom right pane right click on the Disk and select "Change Drive Letter"
Select Remove and Click OK
You may be asked to reboot the server to remove the letter if is in use at the time.
Jon
Select "Manage"
From left pane select Computer Management
On bottom right pane right click on the Disk and select "Change Drive Letter"
Select Remove and Click OK
You may be asked to reboot the server to remove the letter if is in use at the time.
Jon
- Status
Similar threads
