Sorry if this is on a FAQ or been answered before. It seems basic but I could not find anything. How do you remove a class of service on an OPT11? I am looking to remove ADD and DDS from a 2616 so I can program on key07. It won't let me. It says these two CLS are on.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Remove a CLS 1
- Thread starter mbrio
- Start date
-
1
- #2
bigindian65
Technical User
ADD is toggled by TDD not sure if DDS is toggled by NDD, but then you would lose your display?....
Mato' Was'aka
Mato' Was'aka
- Thread starter
- #3
bigindian65
Technical User
I think you would have to go NDD, are you saying you have another one with a display, and you have changed the program key to something else??
Mato' Was'aka
Mato' Was'aka
bigindian65
Technical User
If either the Meridian Programmable Data Adapter
(MPDA) or the Display Module is equipped, then
key 7 on sets M2008, M2216, and M2616 sets and
key 5 on set M2006 become Program keys which
cannot be used as function keys.
Mato' Was'aka
(MPDA) or the Display Module is equipped, then
key 7 on sets M2008, M2216, and M2616 sets and
key 5 on set M2006 become Program keys which
cannot be used as function keys.
Mato' Was'aka
- Thread starter
- #6
7 for display and 15 for handsfree on 2616s
Display away = NDD = now you have key 7
Handsfree away = HFD = now you have key 15
[©] GHTROUT.com [⇔] A Variety of Free Resources for Nortel Meridian/CS1000 System Administrators
Display away = NDD = now you have key 7
Handsfree away = HFD = now you have key 15
[©] GHTROUT.com [⇔] A Variety of Free Resources for Nortel Meridian/CS1000 System Administrators
- Status
Similar threads
- Locked
- Question