Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Removal Expansion Servers from the solution

Status
Not open for further replies.

George FA

Systems Engineer
Jan 30, 2023
28
RU
I have a problem: I often need to recreate a different replicas of customer network in my lab, I ferquently add and disconnect IP500v2 as Expansion Server. There is no issue with addition, it goes fast and smooth, but when I disconnect I see the probles converting IP500v2 back to initial state.
After command "Remove server from the solution" the Primary Server quckly detaches Expansion Server from solution and all looks fine, but detached IP500v2 still remains in Expansion Server state. In order to return IP500v2 back to Standrd Edition mode I had to:

1) Make the "Erase Configuration" command by Manager
2) Wait for reboot
3) Re-connect to default address 192.168.42.1
4) Start ICU, select Standart mode
5) Wait for reboot
6) Change back LAN 1 IP address
7) Wait for reboot
5) Re-issue and re-install ID certificate as I use WebLM

Seems it is a lot of work, which is especially difficult to do remotly.
So, the question is - am I doing right?
Are thre some other, simplier way to detach Epansion Server from Solution?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top