Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations biv343 on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

remotely count cabinets

Status
Not open for further replies.

coniglio

Technical User
Jun 17, 2003
1,886
US
i have option 11s in 13 remote offices. without asking the office managers to physically count them is there a way for me to remotely count the cabinets? and if i have a cabinet with nothing in it can i count that too? thank you.
 
Yes you can. If you OTM and your PBX's connected you look at in the loops window of the maintaince windows. You can alos use LD 32 to stat the confernece loops. Each cabinet has 2 loops. I have an example from a single cabinet machine.

0 (29) Conference Loop Enabled Located on Cabinet 0 Core Card
0 (30) Conference Loop Enabled Located on Cabinet 0 Core Card
0 (31) Conference Loop Disabled - Not responding Located on Cabinet 1 daughter board
0 (62) Conference Loop Disabled - Not responding Located on Cabinet 2 daughter board
0 (94) Conference Loop Disabled - Not responding Located on Cabinet 3 daughter board
0 (95) Conference Loop Disabled - Not responding Located on Cabinet 4 daughter board
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top