Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations biv343 on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Remote Teleworker

Status
Not open for further replies.
ECartman

ECartman

Vendor
Jan 22, 2011
260
IE
Hi Guys,

Having an issue trying get this working. All RTP over UDP ports in Detailed on BCM450 are forwarded from firewall to BCM.

Sets register fine, however remote phone recieves no audio from BCM and the folloing alarm is generated when phone connects.

Alarm ID:50115 - TERM.(0002, :0001): No public media address available for IP set at 192.168.10.85:51004

Any thoughts ? I'm pulling my hair out [hammer]
 
Status
Not open for further replies.

Similar threads

dukane123
  • Locked
  • Question
BCM50 remote packages & fraud protection
Replies
3
Views
258
dukane123
dukane123
gberger
  • Locked
  • Question
Bcm50 R6 no ports left on a remote I2050
Replies
5
Views
355
gberger
gberger
Glenn Yur
  • Locked
  • Question
BCM 50 R6 remote IP 1230 phones time out when dialing out
Replies
4
Views
200
Glenn Yur
Glenn Yur
ramblingrebel
  • Locked
  • Question
remote worker, 1140e and ISP
Replies
9
Views
310
ramblingrebel
ramblingrebel
gberger
  • Locked
  • Question
Unable to use BcmMonitor remotely on Bcm50R6
Replies
2
Views
211
gberger
gberger

Part and Inventory Search

Sponsor

Back
Top